Arkray Assure 530001, Справочное руководство

Страница: 41 / 52

SECTION
F
35
POLICY: INFECTION CONTROL
Purpose
The purpose of this guide is to ensure that correct cleaning and disinfecting of the
Assure® Prism multi Blood Glucose Monitoring System is followed to prevent the potential
transmission of infectious organisms through the Assure Prism multi Blood Glucose
Monitoring System. A strong, consistent facility policy will provide lasting benefits to
healthcare professionals and patients. Please consult with your nursing or infection control
managers to determine your own stated policy.
Both the Centers for Disease Control (CDC) and Joint Commission (JCAHO) recommend
that precautions be taken during all procedures and in all circumstances where there is a
possibility of exposure to blood or any body fluid.
To assist you with the infection control process we suggest you use the following ideas to
assist you in developing an Infection Control Policy and Procedure Guide for your Assure
Prism multi Blood Glucose Monitoring System. Remember, this is not designed to replace
your policy, but to provide a guideline for blood glucose infection control procedures.
Protocol Notes
Personnel should review and follow their organization’s principles of aseptic and infection
control.
Personnel should prevent contamination of themselves and cross-contamination to patients
and other staff by adhering to their organization’s facility-wide infection control policy.
Level of Responsibility:
RN/LPN
Equipment Needed:
• Assure Prism multi Meter
• Assure Prism multi Test Strips
• Lancet or lancing device (we recommend the Assure Lance Safety Lancet)
• Gloves
• Prepared disinfectant
• Appropriate containers for contaminated disposable equipment/gowns
Procedure
1. Prepare for Testing
Wash hands thoroughly. Gather all of the supplies needed to perform a blood glucose test.
Wear gloves and a gown according to organization’s policy.
2. Perform the Test
Follow the instructions on how to perform a test with an Assure Prism multi Meter
(detailed in Section B of the QA/QC Manual).
3. Dispose of used test strip and lancet
Dispose of the used Assure Prism multi test strip and lancet after the test is performed in
the appropriately marked containers or follow your facility’s printed policy of disposal for
this type of matter.
4. Clean and Disinfect
5. Dispose of used gloves or garments in appropriate containers.