Arkon MAGX2, Руководство пользователя

Страница: 23 / 63

MAGX2 User Guide 22 V2.14 1-2-2017
User Settings > Current Loop > Calibration
This function serves to modify current loop output signal.
Possible range: 4
– 20 mA
; 0.5000
– 1.5000

Back with no change

Selection of digit position

Value setting

Confirmation of setup and saving to memory
Calibration
point 1,2
Setup of calibration point 1, 2. First point must be less
than second point.
Calibration
constant 1,2
Setup of calibration constant for first and for second
calibration point.
Formula for calibration constant calculation:
Expected value: 6 mA, Measured value: 6.1 mA
Calibration point one: 6 mA
Calibration constant one = = 0.9836
Expected value: 18 mA, Measured value: 17.9 mA
Calibration point two: 18mA
Calibration constant two = = 1.0056
3.5.13. User Settings > Pulse Output

Back with no change

Item selection

Enter this part of the menu
User Settings > Pulse Output > RE1 & RE2

Back with no change

Item selection

Enter this part of the menu
User Settings > Pulse Output > RE1 & RE2 > RE1 (RE2) function
This function serves to select which signal the output should be
giving. The relays are independent to each other.

Back with no change

Item selection

Selection identification

Confirmation of setup and saving to memory
OFF Output: OFF , fixed status signal
Fixed Output: ON , fixed status signal
Flow+ Output: ON , for any positive flow
Flow
–
Output: ON , for any negative flow
Error Output: ON , for any error identified by the device
The signal can be cancelled by pressing any
push button on the flowmeter.
Air Detect Output: ON , during air detection (empty pipe)
Comparator
On In Output: ON , if the actual flow-rate is within the given
range (can be set under Comparator Flow)
6
6.1
18
17.9