Arkon MAGX2, Руководство пользователя

Страница: 21 / 63

MAGX2 User Guide 20 V2.14 1-2-2017
3.5.6. User Settings > Delete Auxiliary Volume
This function serves to zero the auxiliary flow totalizer.

Back with no change

Item selection

Confirmation of choice

No change

Zero the auxiliary totalizer
3.5.7. User Settings > Start Delay
Time delay for the flowmeter where it, after switching on, will not
request measurement data from the sensor.
Possible range: 0
– 120 s

Back with no change

Selection of digit position

Value setting

Confirmation of setup and saving to memory
3.5.8. User Settings > Samples per Avg.
The number of samples that the flowmeter will use for calculation of
its displayed average flow value/time unit.
Possible range: 0
– 120 samples/avg

Back with no change

Selection of digit position

Value setting

Confirmation of setup and saving to memory
3.5.9. User Settings > Low Flow Cut-off
This function serves to set the minimum flow the flowmeter will
react on.

Back with no change

Item selection

Selection identification

Confirmation of setup and saving to memory
3.5.10. User Settings > Flow Qn
This function serves to setup the nominal flow-rate.
Possible range: 0
– 36000 m3/h

Back with no change

Selection of digit position

Value setting

Confirmation of setup and saving to memory
3.5.11. User Settings > Invert Flow
This function serves to change the definition of flow direction.

Back with no change

Item selection

Selection identification

Confirmation of setup and saving to memory