Arjohuntleigh NIMBUS, Инструкция по эксплуатации

Страница: 12 / 32

6
4. Installation
These instructions cover initial set up and operation of
the
Nimbus Pediatric
System. More detailed
information regarding controls, alarms and indicators is
in Section 5.
Preparing the Pump and Mattress Replacement
Installing the Nimbus
Pediatric Pump
1. Remove the pump from the carton together with the
mattress replacement and cover. You should have
the following items:
• Mattress replacement with cover & tube-set
• Pump and bed bracket
2. The pump can be suspended from the crib foot rail
by means of the hanging device or alternatively
stood upright or on its back on any convenient
horizontal surface.
3. Check there are no protruding springs or similar
sharp objects on the crib base.
4. Place the
Nimbus Pediatric
mattress replacement
on the crib base with the air feed tubes located near
the pump at the foot of the crib, ensuring that the
Auto-Matt
sensor pad is flat.