Arjohuntleigh NIMBUS, Инструкция по эксплуатации

Страница: 21 / 32

15
Alarm Indicator
The pump unit incorporates a sophisticated alarm
detection system to differentiate between patient
movement and genuine alarm conditions. Whenever an
alarm occurs, the flashing red indicator is illuminated.
Additionally, an audible warning will sound unless
cancelled by the
MUTE
button as described earlier.

Once an alarm has been initiated, it can only be cancelled by switching the
pump unit off and then switching back on.
Under some circumstances the low pressure alarm may
be activated after the patient is removed from the
mattress. If this occurs the alarm may be cancelled by
switching the pump off and then switching back on.
For possible causes for the alarm, see the table in
Section 8.
Alarm Mute Button and
Indicator
An audible alarm mute is provided to cancel audible
warning sounds during an alarm condition. The yellow
light is illuminated when the alarm has been silenced.
Mode Select Button
Selects the operating mode, switching between
Dynamic, Static and Autofirm.
Dynamic Mode Indicator
Indicates that the pump is in Dynamic mode.
Static Mode Indicator
Indicates that the pump is in Static mode.
Autofirm Mode Indicator
Indicates that the pump is in Autofirm mode.

When Autofirm mode is selected it remains operational for 30 minutes before
returning to Dynamic mode. After 29 minutes an alarm sounds to warn of the
imminent return to Dynamic operation.