5
Assemble the foot end mattress platform to the head end mattress
platform by sliding the two parts together. Make sure the slot (E) in the
head end section locates over the bar in the foot end section (F), and
thread the actuator cables through the central gap as shown.
Place socket head screws into the two holes (G) on the underside of the
foot end mattress platform to fix the sections together, installing the
bottom screw first. Tighten both screws firmly.
6
Assemble the foot end panel to the bed, lining up the fixing holes in the
arms with the fixing holes (H) in the foot end mattress platform section.
Place two socket head screws into the holes to fix the two sections
together, installing the bottom screw first. Tighten both screws firmly.
The foot end mattress platform section has two sets of fixing holes.
Use the ones closest to the crossbar as shown; the other holes (J) are
used if it is necessary to extend the bed.
H
H
J
G
G
F
E
746-574-AM-1
16
