Arjohuntleigh Maxi Sky 600 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 48

Arjohuntleigh Maxi Sky 600 Скачать руководство пользователя страница 4

Introduction

How to use this Manual

To ensure a safe operation of the Maxi Sky 600, read the
entire manual carefully, especially the section on “Safety
Instructions and Warnings”, before installing, operating, or
servicing this equipment.

Refer to this manual as required. If anything is not completely
understood, please contact your supplier for more details.
Failure to comply with warnings in this manual may result in
injury.

You can obtain additional copies of this manual by contacting
your supplier. Include the User Manual product number (see
front page) and equipment identification number.

Equipment Identification

The unit's identification number (specification, model, serial
number) appears on a silver nameplate attached to front end
of the plastic housing on the lift.

WARNING: Do not attempt to use this equipment
without understanding this manual.

NOTE: ArjoHuntleigh is constantly improving its
products. For this reason, it may be possible to
encounter product modifications without the revision
of this manual or that the contents of this manual
changes without prior notice to users.

ArjoHuntleigh designs and
manufactures quality engineered
patient lifting equipment for the care
of the elderly and disabled in home
care, nursing homes and other health
care facilities.

Please take the time to read the entire
manual, including the section on
“Safety Instructions and Warnings”.
Your manual contains important
information that will allow you to take
advantage of the many characteristics
of your ArjoHuntleigh patient lift.

ArjoHuntleigh Credentials:

•

CE mark (European Union Listing)

•

Global operations for in-warranty
and out-of-warranty service
support for the Maxi Sky 600.

•

Each finished Maxi Sky 600 unit is
individually tested in our laboratory.

•

Maximum lifting capacity is 272 kg
(600 lb). Its engineering safety factor
exceeds that of European
Standards.

•

Complete range of patient lift slings
and supports designed and
manufactured by ArjoHuntleigh
using medical quality materials and
fabrics.

•

FDA Quality System Regulations

COMPLIANT WITH:

CAN/CSA-C22.2

CSA-Z323.5.98

IEC 60601-1

UL 60601-1

ISO 10535

General Information

4

«
...
2
3
4
5
6
...
»

Содержание Maxi Sky 600

















































Отзывы:

Нет отзывов