Arjohuntleigh Maxi Sky 600, Техническое руководство, Страница: 12 / 48

12
Service Procedures
001
.1
415
5.3
3
re
v.
8
11) Engage the transmission by turning the main shaft
clockwise with the 8 mm Allen key (see Fig. 17).
12) Reassemble the lift by performing service procedure
#9.
FOR LIFTS EQUIPPED WITH THE HIGH LIMIT SWITCH
KIT (700-14075)
6) Unscrew the high limit switch kit assembly’s 2 socket
head cap screws with a 4 mm Allen key.
7) Slide out the upper limit kit assembly.
8) Unscrew the 2 T-20 Torx screws (see Fig. 18).
9) Guide the new strap between the two halves of the
high switch limit kit. Make sure that the folded part is
facing away from the drum (see Fig. 19). See Fig. 15
regarding the strap path through to the drum.
10) Join the kit’s two halves together again using the T-20
Torx screws.
11) Lower the high limit switch kit into place and reinstall
the socket head screws (see Fig. 20).
12) Align the loop of the strap with the hole of the retaining bolt.
13) Reinsert the bolt and tighten.
14) Rewind the strap. Make sure it is in the proper winding direction (see Fig. 16).
15) Grease the drum teeth with food-grade grease (refer to “Parts List” manual for part number).
16) Reinstall the upper limit assembly to the frame.
17) Engage the transmission by turning the main shaft clockwise with the 8 mm Allen key (see Fig. 17).
18) Reassemble the lift by performing service procedure #9.
Fig. 19
Fig. 20
Fig. 17
Fig. 18
T-20 Torx
Strap
screws
High limit
switch kit
Socket head
cap screws
Folded part
facing away
from the
drum
Socket head
cap screws
High limit
switch kit