Arjohuntleigh Bari-Breeze, Руководство пользователя

Страница: 15 / 28

9
5. Controls, Alarms and Indicators
Controls and Indicators
Standby
When the pump has power but is in Standby mode, the
7 segment LED display will show a single bar.
Power/Standby
Press the Power/Standby button to turn the pump on.
Max Flow
Press to enable maximum air flow from the pump.
A blue LED on the button will indicate that
Max Flow
is
active. When used during mattress installation, the
mattress will inflate to its normal size within 60 seconds.
If
Max Flow
‘
F
’ is selected when the system is operating
in
Turn
mode then
Turn
mode will be deselected and the
indicator will show .
Unless deactivated, Max Flow will remain active for 15 minutes. After this,
the comfort level will revert to the previous setting, and remain in Static
mode.
Turn Options
The button selects the turn settings of the mattress.
Each press of the button selects the next setting. For
instance, to change the mattress from
Bi-lateral Turn
( )
to
Static
( ) position, press the button twice until
is selected.
In
Left Turn (
) mode the right air cushions in the
mattress will be held at a constant high pressure, and the
left air cushions will be held at a constant low pressure.
This process is reversed for the
Right Turn (
) mode.
When is selected, the system will alternate between
left and right turn, stopping in the central (dwell)
position. During this time the display will show ‘
d
’.
LED Display
Comfort Control
Power/Standby
Lock Out Button/Indicator
Turn Angle
Turn Time
Turn Options
(Soft)
Comfort Control
(Firm)
Max Flow
(Fast Inflate)
Button/Indicator
Button/Indicator
Button/Indicator