Page | 9
Commercial in confidence. Instructions For Use Revision SOR-REV5-090921
4. ELECTRONIC FUNCTIONS DESCRIBED
- Continued
NOTE:
The beds batteries should be charged for 24 hours prior to first use.
NOTE:
Keep the bed plugged to mains power source for optimum performance.
NOTE:
Bed adjustment will be slower when the power cord is unplugged, and the bed
is powered from its batteries only.
4.11 Mains Power Indicator
NOTE:
The mains power indicator is only available on the Foot Board Control Panel.
4.12 Under Bed Lighting
NOTE:
This control function is available on both control devices fitted to the bed.
The under bed lighting feature provides a soft LED illumination of the floor beneath the
bed carriage. This safety feature provides floor illumination for patients at night when
getting in and out of bed. In the event the bed is operating on battery power (e.g. during
transport) the lights will power down after approximately 2-3 minutes of no button use.
WARNING
•
Ensure that the patient, caregivers and or other equipment is not positioned to
become either trapped or crushed during bed adjustment.
•
Ensure that the handset and electrical supply cables cannot become entangled with
moving parts of the bed.
CAUTION
•
Do not operate the beds controls for more than the electronic systems prescribed duty
cycle (interruption 10%, Max 2 minutes / 18 minutes).
