Arjo Prioma, Инструкция по эксплуатации

Страница: 11 / 38

Page | 10
Commercial in confidence. User Manual Revision CTK-REV7-14082019
4. ELECTRONIC FUNCTIONS DESCRIBED - Continued
•
In use the mattress platform may initially rise before tilting. The bed will
automatically adjust to ensure that there is adequate clearance between the
mattress platform and the mechanical structure of the bed before tilting.
•
When reversing the tilt angle of the bed with the tilt button or buttons
remaining depressed, the mattress platform will pause at horizontal for two
seconds before continuing with the tilting movement.
(6) Bed Levelling Function
NOTE: This control function is only available on the Attendant Control Panel if
fitted to the bed.
Pressing “BED LEVEL & UP” will raise the deck until it is horizontal while
simultaneously lowering the backrest and knee break back to a flat deck position.
Pressing “BED LEVEL & DOWN” will lower the deck until it is horizontal while
simultaneously lowering the backrest and knee break back to a flat deck position.
(7) Chair Positioning Function
NOTE: IF FITTED - The Chair positioning function is available on the Attendant
Control Panel (ACP), Attendant Control OpenBus Mini Panel (ACOM) and the
Inset Nurse Side Control Panels at the head end of the bed if fitted to the bed.
Pressing “CHAIR POSITION & UP” will raise the head and lower the foot of the
bed while simultaneously raising the backrest and knee break to create a seated
position.
Pressing “CHAIR POSITION & DOWN” will lower the head and raise the foot of
the bed while simultaneously lowering the backrest and knee break back to a flat
deck position.
(8) Emergency Patient Positioning (CPR)
NOTE: IF FITTED - Emergency Patient Positioning Functions (CPR) are
available on the Attendant Control Panel (ACP), Attendant Control OpenBus
Mini Panel (ACOM) and the Inset Nurse Side Control Panels at the head end of
the bed.
Note: For the Emergency Patient Positioning Functions It is NOT necessary to
press the ‘up/down’ buttons as the operation is programmed to operate
directly from the associated button.