Arjo Prioma Скачать руководство пользователя страница 10

Страница: 10 / 38

Page | 9

Commercial in confidence. User Manual Revision CTK-REV7-14082019

4. ELECTRONIC FUNCTIONS DESCRIBED

- Continued

NOTE:

This control function is not available on the Patient Handset and Inset

Patient Control Panel. It is available on all other control devices fitted to the

bed.

To move the mattress platform up or down, press and hold the appropriate button

or buttons on the control device. The beds platform height can be adjusted

through a range

(depending on castor choice)

of 370mm low height to a high

height of 820mm.

The mattress frame height adjustment uses two actuators working in conjunction

and separate to each other creating the vertical lift and enabling the bed to tilt in

opposite directions.

(3) Knee Positioning Adjustment

NOTE:

This control function is available on all control devices fitted to the bed.

To move the knee positioning section up and down, press and hold the

appropriate button or buttons on the control device. The thigh section is

adjustable through a range of 0° to 35°, which provides adjustable support to the

patient’s legs.

(4) Auto Contour Positioning

NOTE:

This control function is not available on the Attendant Control Panel

(ACP). It is available on all other control devices fitted to the bed.

To move the auto contour positioning press and hold the appropriate button or

buttons on the control device. Auto Contour Positioning provides synchronised

movement of the backrest and knee positioning in one operation. The position

helps provide a more natural resting environment for the patient.

(5) Tilt Positioning – Trendelenburg / Reverse Trendelenburg

CAUTION

Trendelenburg function should only be used under professional supervision.

NOTE:

This control function is not available on the Patient Handset and Inset

Patient Control Panel. It is available on all other control devices fitted to the

bed.

To move the tilt positioning press and hole the appropriate button or buttons on

the control device. The tilt button allows the bed to be positioned in a foot or head

down tilt position. Tilt positioning achievable is between 0° and 14° for both head

and foot down tilting.

Содержание Prioma







































Результаты поиска

Содержание Prioma

Отзывы:

Бренды по названию

Популярные бренды

Arjo Prioma, Инструкция по эксплуатации

Результаты поиска

Содержание Prioma

Отзывы:

Бренды по названию

Популярные бренды