![background image](http://html1.mh-extra.com/html/arjo/miranti-ceb-8x0x/miranti-ceb-8x0x_operating-and-product-care-instructions_2972251028.webp)
28
Cleaning instructions
For the best results, only use
ARJO branded disinfectant cleansers.
If you have any questions regarding disinfecting the
equipment, or wish to order cleaning fluid, contact
ARJO Customer Service.
The following procedure should be carried out after
every bath and at the end of the day.
.
•
Position the stretcher over the bath and
lower it
(1)
.
•
Remove the headrest, the thigh support
cushion
(2a)
, the security grip
(2b-2c)
and
safety belt/belts (when applicable). Place
all in the bottom of the bath.
•
Most ARJO baths are equipped with a spray han-
dle for disinfecting purposes. Read the bathing
equipment instructions on how to use the disin-
fection system. Using the disinfection handle,
apply disinfection fluid over the
Miranti
. If you
don't have the disinfection equipment, you can
use an ordinary spray bottle instead, containing
disinfection fluid mixed according to instructions
on the container.
•
Spray and scrub the upperside of the stretcher and
pay extra attention to
the hinges
and the founda-
tion of the security grip
(3)
.
WARNING
Always use protective gloves and protec-
tive glasses when handling concentrated
cleaning agents. Avoid getting the cleaning
agent on your skin or in your eyes. If this
does occur, rinse thoroughly with plenty of
water. Seek medical advice if irritation
occurs. Always consult the material safety
data sheet for the disinfectant cleanser.
Do not use phenol, citric acid or petroleum-
based solvents, trichloroethylene, clorines
and hydrogen peroxides or similar cleaning
agents as these may damage the plastic
material. If a warm air drier is used, the tem-
perature should not exceed 80 °C (176 °F).
Steam or ethylene oxide sterilization can not
be used either.
WARNING
•
Wash and disinfect the underside of the stretcher
as well
(4)
.
Pay extra attention to the channel (5).
Use a rag or disposable cloth. Scrub the loose
parts.
•
Allow a minimum of 2 minutes for the cleaning
agent to work.
•
Rinse thoroughly with water. The temperature of
the water should not be higher than 60 °C (140
°F).
•
Dry each part of the
Miranti
with a clean cloth.
Pay extra attention to the channel underside of the
stretcher
(6).
.
Safety belt
The safety belt can be cleaned/disinfected together
with
Miranti
as described above or be washed in
80ºC/176ºF water. The safety belt should never be
bleached or ironed. Follow the instuctions on the
label attached on the belt.
The stretcher parts are heavy!
When a part is fold upwards for showering or
drying make sure that it is secured by
(a)
the enclosed sling or by a hand
(b)
during
disinfection procedure (see illustrations).
a
WARNING
Содержание MIRANTI CEB 8X0X
