Arjo MaxxAir ETS, Инструкция по эксплуатации

Страница: 11 / 24

11
5. Ensure that mattress cover is not wrinkled and that buckles on patient’s left head
side and right foot side of cover are properly connected under mattress. If hose
connections have been previously attached, they do not need to be disconnected
to place cover.
6. Secure therapy unit on footboard of bed by extending the arms as shown.
7. Attach hose connectors to therapy unit. Ensure color between the hoses and
sockets are matched.
8. Adjust width of MRS as appropriate.
• When using the 36 in wide bed frame, the
expansion knob should be in line with 36 in.
• When using the 42 in wide bed frame, the
expansion knob should be in line with 42 in
decal as shown. Patient left side surface will
expand in this configuration.
• When using the 48 in wide bed frame, the
expansion knob should be in line with 48 in
decal as shown. Both sides of patient surface
will expand in this configuration.
9. Plug power cord into a properly grounded power source.
It is recommended cord is routed under bed frame. Turn
power ON with switch located on right side panel. The
AIR OFF LED on front panel should illuminate.
Front
Back
Side view of
hose connection
48
”
42”
36”
Ex
pa
nd
abl
e Wid
th
On / Off Switch