Arjo MaxxAir ETS, Инструкция по эксплуатации

Страница: 10 / 24

10
Other bariatric beds - Although other bariatric bed frames may be suitable, special
care should be taken to ensure that appropriate adaptations and additional safeguards
are implemented. Choose a properly-sized bed frame and (when desired) side rails and
positioning aids, ensuring against any gaps that might entrap the patient’s head or body.
Bed Expansions - With variable-width bed frames, Slides and Side Rails should always
be locked in place whenever expanded or retracted.
I.V. and Drainage Tubes – I.V. and drainage tubes should always have slack for
alternating pressure or rotation and other patient movements.
Maximum Recommended Patient Weight - Total patient weight capacity should not
exceed 1000 lb (453.5 kg) or the patient weight capacity of the underlying bed frame,
whichever is less. The use of accessories on the bed may decrease the patient weight
capacity of the bed. Contact Arjo Customer Service for questions concerning the use
of accessories and see the Questions and Information section of this guide for contact
information.
Transfer Board - If a mechanical lift device is not available, a transfer board or
device should always be used when transferring a patient to and from the bed. Use
INSTAFLATE™ function Mode for added safety during transfer.
PATIENT PLACEMENT
It is recommended that all sections of this guide be reviewed prior to product use. Carefully
review the Indications, Contraindications, Risks and Precautions and Safety Information
sections in the Introduction prior to patient placement on the
MaxxAir ETS MRS.
The following information relates to the MaxxAir ETS MRS only. The existing
mattress must be removed.
PREPARATION FOR PATIENT PLACEMENT
1. Level bed and lock brakes. Remove existing mattress from bed frame.
2. Undo storage straps. If equipped, place storage straps into pouch. If not equipped
with pouch, store straps in turning bladder area. See photo below.
3. Position the MaxxAir ETS Mattress Replacement System on the bed frame with
hose set at foot end of bed.
4. Secure mattress to bed frame using hook-and-loop straps
Turning Bladder Zipper
Pouch
Storage Strap