Arjo MaxxAir ETS, Инструкция по эксплуатации

Страница: 17 / 24

17
WEEKLY CARE AND CLEANING
In addition to daily care and cleaning, the MaxxAir ETS Mattress Replacement System
therapy unit, hoses, bed frame, side rails and other components should be wiped down
weekly, depending on soiling.
CLEANING PROCEDURE
When blood and / or body fluids are present, consult a health care professional for
proper use of the following throughout all cleaning procedures:
• Impermeable or water proof gloves
• Plastic apron or gown
• Protective eyewear
Do not clean with solvents or alcohol.
1. Unplug unit before cleaning.
2. Apply a hospital-level cleaner / disinfectant, mixed to manufacturer’s
specifications, to the surface until thoroughly wet. Scrub all areas of therapy unit,
hoses, bed frame, mattress and, if used, the mattress inserts, side rails and pads,
headboard and footboard using a clean cloth. Allow to air dry.
3. Thoroughly wet the surface again with the same cleaner / disinfectant used
in Step 2. Ensure that the surfaces remain wet for the cleaner / disinfectant
manufacturer’s specified contact time.
WARNING - Fluids remaining on controls can cause corrosion which may cause
components to fail or operate erratically, possibly producing potential hazards to
patient and caregiver.
4. Scrub all visible soiling from Air Supply Unit and other components with a damp
cloth. Dry immediately.