Arjo Malibu, Инструкция по эксплуатации

Страница: 38 / 64

38
Clean and Disinfect with Spray Bottle
(30 steps)
Remove visual residue (step 1-7)
1 Raise
Malibu/Sovereign bathtub to convenient working
position.
2 Make sure all functions are turned off.
3 Open the drainage plug to drain any remaining water.
4 Detach and place the loose parts such as armrests, seat of
the transfer chair, neck pillow and other accessories such
as safety belts on the bottom of the
Malibu/Sovereign
bathtub. See Fig. 1
5 Make sure the transfer chair is in the Malibu/Sovereign
bathtub and not outside.
6 Shower and rinse the Malibu/Sovereign bathtub, the lifting
arm and the transfer chair with water to remove visible
residue. Start from the top and move downwards.
7 Shower and rinse the loose parts and the accessories in the
bottom of the Malibu/Sovereign bathtub with water to
remove visible residue. Turn accessories and loose parts
and rinse again.
Clean (step 8-18)
8 Put on protective gloves and protective glasses.
See Fig. 2
9 Spray disinfectant in drain. Use a long handled brush to
scrub drain.
10 Close the drainage plug.
11 Spray disinfectant on all internal
Malibu/Sovereign bathtub
surfaces, the lifting arm and the transfer chair and the loose
parts and other accessories at the bottom of the bathtub.
Turn the loose parts and the accessories and spray on
other side. Pay attention to parts and knobs and sensors
attached to the
Malibu/Sovereign bathtub surface such as
drain control knob/surface overflow outlet. See Fig. 3
12 Spray into the surface overflow outlet. See Fig. 3
13 Scrub the surfaces of
Malibu/Sovereign bathtub, the lifting
arm and the transfer chair, loose parts and accessories with
a soft bristle brush or cloth (to remove any deposits e.g.
skin flakes). Scrub thoroughly, especially on handles.
See Fig. 4
Continue with the steps on the next page
2
1
Fig. 1
Fig. 2
Fig. 3
Fig. 4