START THE AURALIS SYSTEM
33
4. The Alternating mode is set by default.
,IQHHGHGVHOHFWDQRWKHUPRGHVHH³6HOHFW
PRGH´RQSDJH
•
$XWR¿UPPRGHIRUQXUVLQJSURFHGXUHV
• Reactive CLP mode: for constant low pressure
• Transport mode: for transport of the patient
5. For patient comfort, use the Comfort control
buttons to adjust the pressure. The level of
comfort is indicated by a light.
Auralis 110, 175, 200 and Plus mattresses
The default comfort setting is in the middle. The
pressure can be adjusted by two increments higher or
lower than the default setting.
See Figure 47
WARNING
To avoid discomfor t or injur y for the
patient, ALWAYS set the comfor t level at
maximum for patients weighing over 360
kg (793 lb). (Auralis Plus only)
If there is a power failure, the Auralis pump enters
Battery mode. If the Auralis pump is fully charged the
Auralis pump offers a minimum of 3 hours operational
use.
WARNING
If a patient is to be left unattended
whilst using the device, the risk of
falling and injur y should be clinically
assessed, in line with local policy.
Figure 47
Содержание Auralis
Страница 1: ...INSTRUCTIONS FOR USE Auralis 04 AI 00EN_03 10 2020 Alternating pressure system ...
Страница 11: ...HOME CARE 11 Intentionally left blank ...
Страница 51: ...TROUBLESHOOTING AND ALARMS 51 Intentionally left blank ...
Страница 66: ...PARTS AND ACCESSORIES 66 Intentionally left blank ...