ARJAY ENGINEERING HYDROSENSE 2410, Руководство пользователя

Страница: 13 / 28

HYDROSENSE HS2410 Revision 5.0 P a g e 13 | 27
5) Insert the flow plate as shown below. The flow plate has a special reflective core and must be
placed in the Tray with the etched "UP" side facing out (toward you). Snug the knurled screws to
hold the flow plate in place.
Figure 2 – FLOW PLATE SECURE AGAINST TRAY
6) Place the Blue Lamp Box against the Tray and secure it with the retaining latch.
Figure 3 – BLUE LAMP BOX SECURE AGAINST TRAY
7) Be sure the 3 way valve with grab sample take off valve (supplied loose) is installed as per
drawings at the back of this manual. Make sure the inlet sources (process sample and clean
water) are valved for future maintenance and testing operations. Connect the inlet sources to
the 3/8” inlet of the 3 way valve. DO NOT TURN ON THE INLET SOURCES.
Connect the outlet source to drain or a sump.
LATCH
TRAY
LAMP BOX
KNURLED
SCREWS
KNURLED
SCREWS
ETCHED
“UP” SIGN
FLOW PLATE SEAT
ON TRIANGULAR
PIECES