Ariterm Biomatic+, Инструкция по установке и эксплуатации

Страница: 12 / 32

ARITERM SWEDEN AB
•
ARITERM OY
• Asennus ja käyttöohje • Installation och driftanvisning • Installation and operating instruction • 19.11.2009 • 12/32
MENU STRUCTURE
The following tables give an overview of the messages that may appear on the display of the
control unit. They also indicate which parameters the user is allowed to change freely and
which parameters he/she is allowed to change only if instructed to do so by an authorised in-
staller. NOTE! Part of the menu options are displayed only when they are active.
Menu Setting Description
Temperature
Boiler xx (80) °C
5-95°C Boiler temperature, set temperature in brackets.
Flue gas xx (250) °C 120-280°C Flue gas temperature, alarm limit in brackets.
Burner Off (On) mode On/Off
Burner start-up and stop. Burner operating
mode below.
Residual oxygen x.x% -
Displays the amount of residual oxygen while
the burner is in Maintain mode (Accessory)
Auger, external
manual operation Off (On)
On/Off
External auger start-up (visible if the burner is
in Off mode). The remaining operating time is
shown in brackets.
Heating
Pellets
P electricity
Electricity
Heating method selection (visible if the electrical
resistances are being used and the burner is in
On mode - see "Burner Settings").
Outdoor xx°C / Temperature
xx(xx) °C / Room xx(xx) °C
Room 0-30°C
Temperature display of heat regulation circuits
(visible if activated from the Accessories menu).
Fine adjustment
0-20 °C
Fine adjustment of heating circuit 1 (visible if
activated from the Accessories menu and if the
internal sensor is not connected)
Menus -
Accessing submenus: Burner Adjustments, Ope-
rating Time, Pellet Store, Power, Heat Regulati-
on, Service.
Main menu
Menu Setting Description
Electrical resistances 0-3
Activation of electrical resistances
0 = not in use,
1 = 6 kW
3 = 9 kW
Activation difference
10-40 °C Activation temperature of electrical resistances.
Level switch 99% (50%) 10-90%
Displays the pellet level between the level swit-
ches of the burner.
Flame detection 99%
(50%)
1-98%
Displays the flame strength.
Limit value in brackets.
Testing
-
The burner functions (e.g., auger burner, blower,
etc.) can be tested in the menu.
Language Finnish
Suomi, Svenska, English, Ger-
man, Italiano
Menu language selection
Factory settings v090824 Yes / No Restores the original factory settings.
Temperature differen-
ce No
No, 5-60°C
Burner operating lag time. The burner moves to
Maintain mode at the target temperature and
restarts when the temperature has decreased by
an amount equal to the lag time.
Accessories -
The menu can be used to take accessories into
use.
Burner Adjustments menu
Text on the display Setting Description
Total xx h - Burner total operating time in Power mode.
Max xx h
- Burner operating time at Max power.
Mean xx h - Burner operating time at Mean power.
Min xx h
- Burner operating time at Min power.
Operating time electrical
resistance 1
- Operating time of the 6 kW electrical resistance.
Operating time electrical
resistance 2
- Operating time of the 3 kW electrical resistance
Operating Time menu