7000 300 en 00
5
•
Continue to turn the crank until the platform has reached the nearest lower landing.
It should now be possible to open the landing door.
•
If the platform has been lowered too much on the lowest landing, the limit switch
can be activated and it will be necessary to raise the platform again by turning the
crank clockwise.
•
Take out the crank and put it back in the cabinet door.
For electrical lowering:
•
Press the down-button (marked with a down arrow, see
Figure 2-2. U5
•
Make sure the platform moves downwards.
•
Release the button when the platform has reached a landing. The door on that level
shall then be able to be opened.
•
If the platform has activated the final limit switch, the alarm reset button the panel
must be pressed while pressing the up or down button. Please note that this can
damage the lift if it is run in the wrong direction.
Continue for both alternatives:
•
Reset any alarm when the platform is emptied. The push button is marked ‘Alarm
Reset’.
•
Close and lock the electrical cabinet.
N.B.
Make sure that the function of the lift is normal.
•
Switch on the mains power supply.
Rb
Re1
Rf
Re2
Rd1
Rd2
3
1
2
4
5
6
7
8
9
10
12
21
43
2
1
12
3
45
12
3
45
6
5
4
321
32
1
br
blk
blu
br
blk
blu
21
U5
Содержание 7000 Series
