58
18.5.15 Removing the tank temperature sensor
1.
Remove the casing as in step
18.2.1
;
2.
Pull off the NTC connections. Then remove the NTC
from the tank by removing the screws (see Fig.
18.80).
Fig.18.80
18.5.17 Removing the flow switch
1.
Remove the casing as in step
18.2.1
;
2.
Remove electrical connection and the two clips fixing
the flow switch (see Fig. 18.82);
3.
Pull down the lower pipe and remove the flow switch
;
Fig. 18.84
Fig. 18.83
18.5.13 Removing the overheat thermostat
1.
Remove the casing as in step
18.2.1
;
2.
Pull off the thermostat connections. Then remove the
thermostat from the pipe by releasing it’s securing
clip (see Fig. 18.78);
18.5.14 Removing the temperature sensors
(N.T.C’s)
1.
Remove the casing as in step
18.2.1
;
2.
Pull off the NTC connections. Then remove the NTC
from the pipe by releasing it’s securing clip (see Fig.
18.79).
Fig. 18.78
4.
Reassemble in reverse order, the arrow must be
positioned correctly (see Fig. 18.83 and 18.84);
5.
Reassemble in reverse order
Fig. 18.79
Fig. 18.82
18.5.16 Removing the water pressure gauge
1.
Remove the casing as in step
18.2.1
;
2.
Pull off the connections. Then remove the clip from
the pipe (see Fig. 18.81).
Fig.18.81
