/
9
OVERVIEW
Advice for the installer
This appliance is designed to produce hot water for
domestic use.
It should be connected to a distribution network for
domestic hot water that must be compatible with its
performance and power levels.
The use of the appliance for purposes other than those
specified is strictly forbidden. The manufacturer cannot
be held responsible for any damage caused by improper,
incorrect and unreasonable use of the appliance or by the
failure to comply with the instructions given in this manual.
Installation, maintenance and all other interventions
must be carried out in full conformity with the governing
legal regulations and the instructions provided by the
manufacturer.
Incorrect installation can harm persons, animals and
possessions; the manufacturing company shall not be
held responsible for any damage caused as a result.
The applaince is delivered in a carton. Once you have
removed all the packaging, make sure the appliance is
intact and that no parts are missing. If this is not the case,
please contact your supplier.
Keep all packaging material (clips, plastic bags,
polystyrene foam, etc.) out of reach of children as it may
present a potential hazard.
In the event of a fault and/or malfunction, turn the
appliance off, turn off the gas cock, remove the batteries
and do not attempt to repair it yourself. Contact a qualified
professional instead.
All repairs, which should only be performed using
original spare parts, should be carried out by a qualified
professional. Failure to comply with the above instructions
could compromise the safety of the appliance and
invalidate all liability on the part of the manufacturer.
In the event of any maintenance or other structural work
in the immediate vicinity of the ducts or flue gas exhaust
devices and their accessories, switch OFF the appliance
remove the batteries and shutting off the gas control valve.
When the work has been completed, ask a qualified
technician to check the efficiency of the ducting and the
devices.
THE INSTALLATION AND FIRST IGNITION
OF THE APPLAIANCE MUST BE
PERFORMED BY QUALIFIED PERSONNEL
IN COMPLIANCE WITH CURRENT NATIONAL
REGULATIONS REGARDING INSTALLATION,
AND IN CONFORMITY WITH ANY REQUIREMENTS
ESTABLISHED BY LOCAL AUTHORITIES AND
PUBLIC HEALTH ORGANISATIONS.
Turn the appliance OFF and remove the batteries to clean
the exterior parts of the appliance.
Clean using a cloth dampened with soapy water. Do not
use aggressive detergents, insecticides or toxic products.
If the appliance is used in full compliance with current
legislation, it will operate in a safe, environmentally-
friendly and cost-efficient manner.
If using kits or optional extras, make sure they are
authentic.
WARNING!!
Water with a temperature higher than 50°C
can cause serious burns.
Always verify water temperature before use.
WARNING!!
NEVER TAMPER WITH OR DECOMMISSION
THE FLUE GAS SENSOR. THIS COULD
AFFECT THE PROPER OPERATION OF THE
APPLIANCE.
POOR DRAUGHT CONDITIONS COULD
CAUSE EXHAUST GAS BACKFLOW INTO
THE INSTALLATION ROOM.
HAZARD OF CARBON MONOXIDE
INTOXICATION
WARNING!!
The device must be activated only in
presence of water in the exchanger.