6
/
USER’S MANUAL
Appliance power adjustment
The knob lets you adjust the water temperature and
power:
- Turn clockwise to increase heat output.
The water temperature increases.
- Turn anticlockwise to decrease heat output.
The water temperature decreases.
Flow rate and water temperature adjustment
The knob lets you adjust the flow rate and the water
temperature:
- Turn anticlockwise to increase the flow rate. The water
temperature decreases.
- Turn clockwise to decrease the flow rate. The water
temperature increase.
Switching off procedure
Press the ON/OFF button placed under the appliance.
To switch off the device completely close the gas isolation
valve.
WARNING!!
NEVER TAMPER WITH OR DECOMMISSION
THE FLUE GAS SENSOR. THIS COULD
AFFECT THE PROPER OPERATION OF
THE APPLIANCE.
POOR DRAUGHT CONDITIONS COULD
CAUSE EXHAUST GAS BACKFLOW INTO
THE INSTALLATION ROOM.
HAZARD OF CARBON MONOXIDE
INTOXICATION
Appliance shut-off conditions
The appliance is protected from malfunctions by means of
internal checks which stops the appliance from operating
if necessary.
In the event of lockout see table below.
Error code table
Description
Checks to make
Battery exhausted
RED L.E.D. Fixed
Replace battery
No hot water produced
The appliance won’t start
- Ensure that the gas
isolation valve is
open
- Ensure that the
inlet water isolation
valve is open
- Assurer que le
bouton n’est pas en
position OFF
- Check/Replace
batteries
If the appliance won’t start again or stops
repeatedly, once you’ve carried out the relevant
checks, turn the knob to the OFF position, close
the gas valve, remove the batteries and contact a
qualified technician.
SHOULD THE ERROR NOT BE ELIMINATED, DO
NOT ACTIVATE THE APPLIANCE.
