USA MAV500/MKVI Service Manual
Bill Acceptor
The number is recorded in the stacker during the Power On Reset procedure if the
unit is empty (physically and electronically). The number is checked if the stacker is
removed and replaced, as might occur during maintenance activities.
•
Bill Transaction Information
: Each bill transaction and bill denomination is
recorded.
•
Diagnostics
: fault information is analysed and stored in the stacker module.
After processing, maintenance personnel may be targeted to specific machines to
perform maintenance.
Figure 9-4 GPT Stacker
Stacker Physical Description
The stacker features a self-aligning connector that provides electrical connection and
aligns the stacker to the bill acceptor. Access to the stored bills is only possible by
unlocking the hinged steel door at the rear of the module with a tubular security key.
The stacker assembly is a sturdy, locked steel box capable of storing approximately
500 stacked currency bills.
The interior of the stacker contains a spring-loaded pressure plate which supports the
bill stack and a pair of bill support rails on which presented bills lie prior to the
stacking operation. The front surface of the stacker incorporates a handle and a clear
plastic label retainer.
28-00486-00
9-9
This document contains confidential information which is proprietary to ATI. It may not be disclosed to any unauthorized parties,
and it may not be copied. All rights reserved.
© Copyright (ATI) Aristocrat Technologies, Inc. 2002.
