Arista DCS-7304 Скачать руководство пользователя страница 36

Страница: 36 / 58

Quick Start Guide: 7300 Series Modular Data Center Switches

Line Card Module Indicators

Appendix A: Status Indicators

Component Activity Status LEDs

LEDs located below the vents and left of the input ports display summary indicators for power supplies,
fabric modules, fan modules, and line cards.

Table A-2

interprets the states of these indicators. When

error conditions are indicated, refer to LEDs on the specified modules to determine the condition’s
source.

A.2

Line Card Module Indicators

Each line card module provides one status LED plus LEDs for each port on the card. The figures in

Appendix F

indicate the location of the LEDs on each line card.

Figure A-2-left

displays the status LED

and Port LEDs on the left side of the DCS-7300X-64S-LC line card.

Figure A-2-right

displays the status

LED and Port LEDs on the left side of the DCS-7300X-32Q-LC line card.

Figure A-2: Linecard Status LEDs (DCS-7300X-LC and DCS-7300X-32Q-LC)

The Line Card Status LED is in the top left corner of the DCS-7300X Line Card.

Table A-3

interprets

the states of the Status LED.

Table A-2 Component Activity LED States

LED Name

LED State

Module State

Power Supply
Line Card
Fabric Module

Off

No modules are present or powered.

Green

All powered modules are operating normally.

Red

At least one module has failed.

Fan Modules

Off

Module not inserted.

Amber

At least one fan is missing or has failed.

Green

All modules are operating normally.

Red

There are insufficient functional fans installed in the switch.

Table A-3 Line Card Status LED States

LED State

Status

Off

Line card not inserted.

Green

Line card operating normally.

Содержание DCS-7304



























































Результаты поиска

Содержание DCS-7304

Отзывы:

Бренды по названию

Популярные бренды

Arista DCS-7304, Быстрый старт

Результаты поиска

Содержание DCS-7304

Отзывы:

Бренды по названию

Популярные бренды