Arista CloudVision DCA-CV-100, Быстрый старт

Страница: 25 / 46

Appendix B
Rack Installation
Each appliance provides an accessory kit that contains parts that are required to install the appliance.
The following sections list the installation parts provided by the accessory kit.
• Four-post Rack Installation .
• Two-Post Rack Mount Parts .
B.1 Four-post Rack Installation
Use the following steps to assemble the racking rails and attaching the components to the system.
1. Identifying the Rail Kit contents.
Locate the components for installing the rail kit assembly:
• Two sliding rail assemblies (1).
• Two hook and loop straps (2).
2. Installing and Removing Tool-less Rails (Square Hole or Round Hole Racks).
a. Position the left and right rail end pieces labeled FRONT facing inward and orient each end
piece to seat in the holes on the front side of the vertical rack flanges (1).
b. Align each end piece in the bottom and top holes of the desired U spaces (2).
c. Engage the back end of the rail until it fully seats on the vertical rack flange and the latch clicks
into place. Repeat these steps to position and seat the front end piece on the vertical rack flange
(3).
d. To remove the rails, pull the latch release button on the end piece midpoint and unseat each rail
(4).
21