Arista CloudVision DCA-CV-100, Быстрый старт

Страница: 34 / 46

8 USB Connector Allows you to connect USB
devices to the system. The port
is USB 2.0-compliant.
9 USB Connector Allows you to connect USB
devices to the system. The port
is USB 3.0-compliant.
10 System Identification Button The identification buttons on
the front and back panels can
be used to locate a particular
system within a rack. When one
of these buttons is pressed, the
system status indicator on the
back flashes until one of the
buttons is pressed again.
Press to toggle the system ID
on and off. If the system stops
responding during POST, press
and hold the system ID button
for more than five seconds to
enter BIOS progress mode.
To reset the iDRAC (if not
disabled in F2 iDRAC setup)
press and hold the button for
more than 15 seconds.
11 System Identification Connector Connects the optional system
status indicator assembly
through the optional cable
management arm.
12 Ethernet Connector 3 Integrated 10/100/1000 Mbps
NIC connector.
13 Ethernet Connector 4 Integrated 10/100/1000 Mbps
NIC connector.
14 Power Supply (PSU1 and PSU2) Up to two 550 W redundant AC
power supplies. (One supplied.)
30