Arista CloudVision DCA-CV-100, Быстрый старт

Страница: 41 / 46

Appendix F
Host Console Access via IPMI
If you have a problem accessing the host externally, SSH into IPMI and access the host console.
Note: This procedure will reboot the server.
Using an SSH client, complete the steps below:
1. SSH into the IPMI and login with the root user and iDRAC password. You will get a login similar to
admin->
. This indicates you are in the iDRAC SSH console.
2. Execute the following commands:
racadm config -g cfgSerial -o cfgSerialBaudRate 9600
racadm config -g cfgSerial -o cfgSerialCom2RedirEnable 1
racadm config -g cfgSerial -o cfgSerialSshEnable 1
racadm config -g cfgIpmiSol -o cfgIpmiSolEnable 1
racadm config -g cfgIpmiSol -o cfgIpmiSolBaudRate 9600
racadm set BIOS.SerialCommSettings.SerialComm OnConRedirAuto
racadm set BIOS.SerialCommSettings.SerialPortAddress Serial1Com2Se
rial2Com1
racadm jobqueue create BIOS.Setup.1-1
racadm serveraction powercycle
The IPMI should now be configured to access serial console.
3. From the IPMI SSH interface, run the command below to access the serial console:
console com2
4. To return to the IPMI interface and disconnect from the console, the default escape sequence is
^\
(CTRL+\)
, or simply close the SSH window.
37