Arista 750 Series Скачать руководство пользователя страница 62

Страница: 62 / 68

Quick Start Guide: 750 Series Modular Switches

Linecards

Appendix F: Maintenance and Field Replacement

Figure F-1: CCS-75x linecard install

F.4.1

Removing Linecard

Perform the following steps to remove a linecard.

Step 1

Put on a grounded, anti-static ESD strap.

Step 2

Move the left and right handle outwards until the ejector lever releases the linecard.

Step 3

Slide the linecard out using care as the linecard could be heavy.

F.4.2

Removing Linecard Blank

The linecard blank has plastic latches.

Step 1

Put on a grounded, anti-static ESD strap.

Step 2

Grip the plastic handles to release the latch and remove the blank from the linecard slot you
are going to populate.

You may want to save the blank for future use as needed. The blank is needed for the switch to operate
normally if a linecard slot is not populated.

1 Linecard

3 Ejector lever (linecard seated

correctly)

2 Ejector mechanism (lever

and handle)

4 Ejector lever (linecard not

seated)

Содержание 750 Series





































































Результаты поиска

Содержание 750 Series

Отзывы:

Бренды по названию

Популярные бренды

Arista 750 Series, Быстрый старт

Результаты поиска

Содержание 750 Series

Отзывы:

Бренды по названию

Популярные бренды