Arista 750 Series, Быстрый старт

Страница: 40 / 68

34 Quick Start Guide: 750 Series Modular Switches
Supervisor Module Appendix A: Status Indicators
Figure A-2: Supervisor CCS-750-SUP25
1. There is a similar mechanism on the left.
A.1.2 Supervisor Status LEDs Behavior
Note LED behavior is described for the active supervisor, except where noted.
A.1.2.1
Supervisor Status LED
Table A-1 interprets the states of the supervisor status LED. s for both the active and the redundant
supervisor module.
A.1.2.2
Supervisor Active Status LED
Table A-2 interprets the states of the supervisor active status LED.
1
Supervisor status LED 5 Switch card status LED 9 Ethernet management ports
2 Supervisor active status LED 6 Fan status LED
10
RJ-45 Serial console port
3 PSU status LED
7
Uplink status LED 11 USB Port
4
Line card status LED 8 SFP25 uplink ports
12
Release/locking mechanism
1
Table A-1 Supervisor status LED states
State Status
Off Supervisor has no power or is powering up.
Blinking Green Supervisor is booting. System can take up to 30 minutes to come up. All other
LEDs will also be off.
Green Supervisor is operating normally (master supervisor). System is good.
Yellow/Amber/Orange System is overheating or has been disabled by software.
Blinking Blue Locater function enabled by CLI (Beacon).
Table A-2 Supervisor Active status LED states
State Status
Off Supervisor is the standby supervisor. All other LEDs except Supervisor Status
remain off.
Green Supervisor is the Active supervisor.