ARIMA RIOWORKS SDVIC, Руководство пользователя

Страница: 17 / 92

5
Hardware Installation
1 - Hardware Installation
Step 2
Install Memory
SDVIB uses 184-pin Double Data Rate (DDR) Inline Memory Modules
(DIMM). Four DIMM sockets are available for 2.5Volts (power level),
PC2100/PC1600, Unbuffered/Registered DDR SDRAM with 32MB,
64MB,128MB, 256MB, 512MB and 1GB combinations. And the total memory
size is between 32MB and 4GB.
IMPORTANT
q
Use only PC2100/PC1600 DIMM. If non-compliant modules are
used, the system will not be able to boot up because of the strict
timing issues involved under this speed
q
To utilize the chipset’s Error Checking and Correction (ECC)
features, you have to choose the DIMM module with odd chips
(devices) per side (standard 8 chips (devices)/side plus 1 ECC chip)
and check if the setting is proper in the selection ”<Memory
Parity/ECC Check” in the selection “Advanced Chipset Setup” in
the BIOS Utility.
q
Unbuffered and registered DDR SDRAM should not be mixed and
use together.
q
Memory installation in following combination as follows:
DIMM # Available DIMM size
DIMM 0 32,64,128,256,512,1GB
DIMM 1 32,64,128,256,512,1GB
DIMM 2 32,64,128,256,512,1GB
DIMM 3 32,64,128,256,512,1GB
Total available
memory size 32MB (one 32MB of the four DIMM sockets) to 4
GB
(4 x
1GB in four DIMM sockets)