ARIMA RIOWORKS SDVIC, Руководство пользователя

Страница: 68 / 92

32 2 -
BIOS Setup
BIOS
S
etup
RTC Alarm
Resume
When
Enabled,
your can set the date and time at
which the RTC (real-time clock) alarm awakens the
system from Suspend mode. Default is Disabled
The choice: Disabled
(Default)
, Enabled
Ø IRQ Activity Monitoring
Primary INTR
When set to On
(Default
)
, any event occurring at
will awaken a system which has been powered
down.
The following is a list of IRQ’s,
I
nterrupt
R
e
Q
uests,
which can be exempted much as the COM ports
and LPT ports above can. When an I/O device
wants to gain the attention of the operating system,
it signals this by causing an IRQ to occur. When
the operating system is ready to respond to the
request, it interrupts itself and performs the service.
When set On, activity will neither prevent the
system from going into a power management mode
nor awaken it.
IRQ3 (COM 2 ):Primary (Default)
IRQ4 (COM 1):Primary (Default)
IRQ5 (LPT 2) :Primary (Default)
IRQ6 (Floppy Disk) :Primary (Default)
IRQ7 (LPT 1) :Primary (Default)
IRQ8 (RTC Alarm) :Disabled (Default)
IRQ9 (IRQ2 Redir) :Secondary (Default)
IRQ10 (Reserved)):Secondary (Default)
IRQ11 (Reserved) :Secondary (Default)
IRQ12 ( PS / 2 Mouse ) :Primary (Default)
IRQ13 (Coprocessor) :Disabled (Default)
IRQ14 (Hard Disk) :Primary (Default)
IRQ15 (Reserved) :Disabled (Default)