ARIMA RIOWORKS SDVIC, Руководство пользователя

Страница: 35 / 92

23
Hardware Installation
1 - Hardware Installation
Step 6.
Powering on Your Computer
1. Be sure that all switches are off (in some systems, marked with “O”).
2. After finishing all jumper settings and connections, close the system case
cover.
3. Connect the power supply cord into the power supply located on the back
of your system case.
4. Connect the power cord into a power outlet that is equipped with a surge
protector.
5. You may then turn on your devices in the following order:
Ø
Your monitor
Ø
External SCSI devices (starting with the last device on the
chain)
Ø
Your system power.
For ATX power supplies, you need to switch on the power supply as well
as press the ATX power switch on the front of the case.
6. The power LED on the front panel of the system case will light up. For
ATX power supplies, the system LED will light up when the ATX power
switch is pressed. The monitor LED may light up after the system’s LED if
it complies with “green” standards or if it has a power standby feature.
The system will then run power-on tests. While the tests are running,
additional messages will appear on the screen.
If you do not see
anything within 30 seconds from the time you turn on the power, the
system may have failed a power-on test.
Recheck your jumper
settings and connections or call your retailer for assistance.