9
PARTS NEEDED
TOOLS NEEDED
Slide the lower mounting posts [M]
onto the installed mounting post
clamps [N], so that bolts are facing
the outside of the snow thrower.
2
M
N
Repeat on the other side.
Important: Make sure no wires are
secured inside the U-Bolt [P].
1
c
1
b
N
O
P
Q
S
P
O
N
S
R
Attach parts N, O, P, R & S as shown on the upright of your snow thrower handlebar
making sure to face the stub tube forward on machine.
2
+
ATTACH THE MOUNTING SYSTEM TO YOUR SNOW THROWER (FIG.
1
-
4
)
Note: Exact positioning may vary depending on your machine.
Note: In some instances, it may be necessary to mount the top U-bolts [P] above the handlebar crossbar support. This will help the
assembled cab sit higher for added clearance.
Note: For snow cabs with square tubes please reference the instructions in the snow cab square tube clamp adaptor kit
STEP
6
1
/
2
in. Box
Wrench
OR
OR
1
/
2
in. Socket
Wrench
Adjustable
Wrench
O
M
P
S
Hand tighten. Later adjustment may be necessary to line up with the frame
mounting posts.
To mount the cab higher on your machine, insert the extender bars [U] into the lower
mounting posts [M]. Securely tighten the extender bars to the lower mounting posts.
1
a
3
4
OPTIONAL
M
M
U
U
R
Optional
N
N
