5
PARTS NEEDED
TOOLS NEEDED
ASSEMBLE THE BACK HOOP FRAME (FIG.
1
-
6
)
Note: It may help to place the parts flat on the ground for easier assembly.
Note: The back hoop side and corner poles [F and G] each have clear plastic sleeves on one end.
The frame hoop top pole [H] DOES NOT have clear plastic sleeves.
+
NONE
STEP
2
H
F
G
Insert the back hoop side pole
assembly into the upper stub tubes on
the right and left side of the frame.
Make sure all the poles are fully
inserted before proceeding.
Insert the back hoop corner
poles [G] over the end of the top
back hoop side poles [F] set.
Connect two side poles [F] together
for each side of the cab frame.
Repeat with the remaining back hoop
corner poles [G] and the remaining
top back hoop side poles [F] set.
Insert each end of the back hoop
top pole [H] into the ends of both
back hoop corner poles [G].
The back hoop side poles [F] are designed to fit together by matching tapered ends
as shown.
5
6
3
a
3
b
4
1
a
1
b
F
F
F
F
F
G
G
G
H
H
G
F
F
2