Argus 671020, Инструкция по эксплуатации

Страница: 8 / 47

Argus E25 MOD II - Operating Instructions
8
Description
Scope of supply, technical data and description
of the unit
Scope of supply
The following parts are included in the basic scope of supply:

Actuator E25 MOD II

These Operating Instructions
The scope of supply may also include contract-specific, addi-
tional documents, for example:

Operating instructions of the valve manufacturer
For precise details of the scope of supply for your unit, please
see the delivery note.
All units can be supplied with a hand lever as an option.
The unit can be supplied in one of several different states.

Unit supplied mounted on a valve

Unit without a valve
When the valve is part of the scope of supply, it will have been
set up already by the manufacturer.
At the customer’s request the unit can be supplied packed
individually, or several units can be packed together in any of
the following transport packages:

Transport box

Wire-mesh crate

Pallet
On reception of the delivery, compare the order number on
the delivery note with the details on the typeplate.
Check that all parts are complete and in good condition.
Contact the manufacturer without delay if there are devia-
tions or there is anything you are not clear about.
We will not accept complaints made later.
Technical data
You will find all technical data on the typeplate of the unit and in
the data sheet.
As standard the E25 MOD II is offered with one of three stand-
ard motor voltages:
Motor:
U=110-125V DC/AC, I=2.1A, P=130W
or
U=220V DC/AC, I=0.95A, P=130W
or
three-phase
U=380-440-V 50Hz/ 460-480V 60Hz
The motors have internal thermal switches which break the
circuit at 184°C.