Argus 671020, Инструкция по эксплуатации

Страница: 38 / 47

Argus E25 MOD II - Operating Instructions
38
Specialist personnel must have
knowledge and experience of the follow-
ing:

legal regulations covering the handling
of hazardous substances and high
voltages that apply where the unit is
installed,

special instructions for handling the
high voltages and hazardous sub-
stances that occur,

use of the specified protective cloth-
ing.
ATTENTION!
For an installed valve, the follow-
ing always apply: Environmental
damage may be caused by resi-
dues of poisonous media.

Before disposal make sure the
unit has been cleaned and is
free of media residues.

Dispose of all materials in
accordance with the legal re-
quirements that apply where
the unit is installed.
Remove all electrical wiring and ca-
bles, and, where appropriate, liquid
residues in the valve; when doing this,
observe the operating instructions for
the valve.
Dispose of all residues in accordance
with the legal requirements that apply
where the unit is installed.
Removing the unit
DANGER
When working on equipment and
components carrying electric
voltage, or on pipework, very
serious injuries or death can be
caused by electric shock, burns,
high pressure in the system, or
poisoning.

Make sure there are no hot or
hazardous media on the unit
or the pipelines.

If the valve is installed, make
sure there is no residual pres-
sure in the pipeline.

Make sure the unit is discon-
nected from all electric power
supplies.

Make sure the plant is
switched off and secured
against unauthorised switching
back on.

Make sure the unit and pipe-
lines have cooled so that they
are no more than hand warm.

Wear suitable protective cloth-
ing and, when necessary use
suitable protective equipment.
For more information about suitable pro-
tective clothing and protective equipment,
see the safety data sheet for the medium
being handled.