manualshive.com logo in svg

Argus 165, Руководство пользователя

Поделиться
Скачать
Argus 165 Скачать руководство пользователя страница 171

16 Network scan

ARGUS 165

 

171

16 Network scan

In a network scan, ARGUS identifies and displays all hosts, services and servers in a pre-
configured subnet. The network scan can only be executed on an Ethernet interface. 

Scanning via DSL is not possible.

The network scan requires the following parameters. 

Protocol-independent parameters:

The opening of test parameters is described in the chapter "Configuring accesses", see 

page 36

Mode

Network 
address

Netmask

When scanning a network, please observe the applicable legal and data 
protection requirements.

Setting

Description

Test parameter:

Network scan:

In "Manual" mode, the network scan uses the stored network address and 
netmask. In "Automatic" mode, the instrument reads the parameters from 
the connected DHCP server.

Default: 

Manual

The network address specifies the subnet to be searched for hosts and 
services. 

Range: 0.0.0.0 to 255.255.255.255

Default: 

192.168.1.0

The netmask is a part of the network address and describes the size of the 
subnet.

Range: 0.0.0.0 to 255.255.255.255

Default: 

255.255.255.0

ARGUS only scans a limited number of hosts, services and servers. The subnet 
to be scanned should thus always be sized as small as possible; otherwise 
ARGUS will not show any results.

ARGUS still communicates with the DHCP computer even when Manual is 
selected. When the server returns an IP address that is not in the same subnet as 
the manually configured one, the test fails.

Содержание 165












































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды