Argus 165 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 363

Argus 165 Скачать руководство пользователя страница 12

2 Safety information

12

ARGUS 165

2 Safety information

ARGUS may only be operated using the accessories supplied with the device. The use of
other accessories can result in faulty measurements or even damage to ARGUS and the
connected equipment. Only use ARGUS according to the instructions contained in this
accompanying document. Use in any other manner can cause harm to persons or destroy
your ARGUS.

-

Before connecting ARGUS to an access, make sure that no dangerous
voltages or voltages for which ARGUS and its accessories are not specified
are present. Also keep in mind that the voltage can change over the time that
the device is connected.

-

Use ARGUS only according to its intended purpose at all interfaces and local
loops.

-

Voltages over 50 V AC and 120 V DC can cause death.

-

Never conduct measurements without the battery pack!

-

ARGUS is not waterproof. Therefore, protect ARGUS against water
penetration.

-

Before replacing the battery pack, disconnect the power adapter and all
measuring leads and power ARGUS down.



ATTENTION: Never remove the battery pack during operation.

-

Remove the power adapter from the mains socket as soon as ARGUS is
switched off or no longer in use (e.g.after charging the battery pack)!

-

ARGUS may only be used by trained personnel.

-

ARGUS may only be operated using the power adapter supplied with the
device.

-

Only manufacturer-approved headsets may be connected to the headset
socket; any other use of this socket (e.g. connection to a home entertainment
system) is expressly prohibited.

-

Only the Active Probe II, the ARGUS Copper Box and the other
manufacturer-approved USB devices without mains connection may be
connected to the USB host interface (USB-A). Any other use (e.g. connection
to a PC) is expressly prohibited.

-

If external USB devices are used on the USB-host interface (USB-A), no
warranty is assumed for occurrences outside the mechanical wear of normal
plug-in.

-

In battery power mode, always cover the ARGUS power socket with the
supplied rubber protective cap labelled "Power".

-

Only use the SFP slots for SFP types explicitly approved by intec GmbH.
Never insert other objects or SFP modules into the SFP slots.

-

When the SFP slots are not in use, always make sure that they are sealed
using the supplied protective covers.

«
...
10
11
12
13
14
...
»

Содержание 165












































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды