Issue 1 25/2/2019
2
WARNING
If in doubt about the installation of this light fitting or difficulty is
experienced consult a qualified electrician.
Ensure that the power is switched off at the fuse box, and remove the
relevant fuse or circuit breaker before installing this fitting.
Always use the recommended lamp (bulb) type and do not exceed the
maximum wattage.
If the glass lampshade is damaged, stop use immediately and contact
the helpdesk for advice / replacement. Take care when handling glass
shade.
The surfaces of this light fitting and the lamps get hot during use, do
not touch. Switch off and allow lantern and lamp to cool fully before
replacing the lamp or cleaning the fitting.
This product should not be modified, any modification may make the
fitting unsafe.
Wear safety goggles and dust mask when drilling.
The use of a residual current device (RCD) is recommended when
working with power tools.
Always use a suitable platform (e.g. stepladder) when installing this
light fitting. Read the manufacturers safety instructions and do not
exceed the maximum weight loading for the platform.
Take care when lifting and installing this light fitting and seek
assistance if you find it heavy or cumbersome.
Explanation of symbols
This fitting must be connected to an earthed supply.
IP44
Protected against solid objects greater than 1mm.
Protected against splashing water
This light fitting must be installed in accordance with the Institution of
Electrical Engineers (BS 7671) Wiring Regulations and the current
Building Regulations. If in any doubt consult a qualified electrician.
