V 11/17
42
12. LIGHT button
Press this button to turn off the indoor unit's display light. The
icon will disappear from the
remote control display.
Press this button again to turn on the display light. The
icon will appear on the display.
Getting to know the button combination functions
Energy saving function
In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the energy
saving function. When you start the energy saving function, "SE" will appear on the remote
control display and the air conditioner will automatically adjust the set temperature according to
the factory settings to achieve the best energy-saving effect. Press TEMP and CLOCK again
simultaneously to exit the energy saving function.
N.B.:
• When the energy saving function is enabled, the fan will operate at the default automatic speed
and cannot be adjusted.
• When the energy saving function is enabled, the set temperature cannot be adjusted. The
remote control will not send a signal to the unit when the TURBO button is pressed.
The SLEEP and energy saving functions cannot operate simultaneously. If the energy saving
function was set in cool mode, press the SLEEP button to cancel it. If the SLEEP function was
set in cool mode, start the energy saving function to cancel it.
8°C heating function
In cool mode, press the TEMP and CLOCK buttons simultaneously to start or stop the 8°C
heating function. When this function is enabled,
and 8°C will appear on the remote control
display and the air conditioner will continue to operate at 8°C. Press TEMP and CLOCK again
simultaneously to exit the 8°C heating function.
N.B.:
• When the 8°C heating function is enabled, the fan will operate at the default automatic speed
and cannot be adjusted. The remote control will not send a signal to the unit when the TURBO
button is pressed.
The SLEEP and 8°C heating functions cannot operate simultaneously. If the 8°C heating function
was set in cool mode, pressing the SLEEP button will cancel it. If the SLEEP function was set in
cool mode, starting the 8°C heating function will cancel it.
• When the temperature display is in °F, the remote control will show that the unit is operating at
46°F.
Remote control button lock function
Press "▲" and "▼" simultaneously to enable or disable the remote control button lock function.
When this function is enabled,
will appear on the remote control display. If you attempt to
operate the remote control, the
icon will flash three times and no signal will be sent to the unit.
Switching temperature display
In OFF mode, press the "▼" and "MODE" buttons simultaneously to switch from a temperature
display in °C to °F.
Operating guide
General operations
1.
When you connect the power, press the "ON/OFF" button on the remote control to turn
the air conditioner on.
2.
Press the MODE button to select the desired operating mode: AUTO, COOL, DRY, FAN
or HEAT.
Содержание Ecolight 12000 UI
Страница 28: ...V 11 17 59 ...