V 11/17
41
Pressing this button will allow you to display the set temperature, the indoor ambient
temperature, or the outdoor ambient temperature on the indoor unit's display. You can cycle
through the settings on the remote control display as shown below:
Nessuna visualizzazione
no display
• When you select
or “no display” with the remote control, the set temperature will appear
on the indoor unit's display.
• When you select
with the remote control, the indoor ambient temperature will appear on
the indoor unit's display.
• When you select
with the remote control, the outdoor ambient temperature will appear on
the indoor unit's display.
N.B.:
•
It is not possible to display the outdoor ambient temperature on all models. The indoor unit
will receive the
signal but will display the set temperature.
•
The set temperature will appear on the unit's display on start-up, if enabled to do so.
• When you select to display the indoor or outdoor ambient temperature, the indoor unit will
display the corresponding temperature for three to five seconds, after which it will
automatically revert to displaying the set temperature.
8. TURBO button
In cool/heat mode, press this button to switch to rapid cool/heat mode. The
icon will appear on
the remote-control display. Press this button again to exit the TURBO function. The
icon will
disappear from the display.
9. I FEEL button
Press this button to start the I FEEL function. The
icon will appear on the remote control
display. When you select this function, the remote control will send the detected ambient
temperature to the indoor unit, which will then adjust its operation automatically based on the
difference between the detected temperature and the set temperature.
Press the button again to exit the I FEEL function. The
icon will disappear from the display.
The remote control should be positioned near the user when this function is selected. The
remote control should not be placed anywhere high or low temperatures may occur to
avoid inaccurate ambient temperature detection.
10. TIMER ON/OFF button
On a working unit, press this button to set the unit's power off time. When the unit is off, press
this button to set the unit's power-up time. By pressing this button, the HOUR ON or HOUR OFF
indicator starts blinking: if you press "▲" or "▼" buttons you can set the time (from 0.5 to 24) to
switch the unit off or on. Hold down the button "▲" or "▼" for 2 seconds to quickly change the
time until the desired time is reached. Press the TIMER button to confirm the TIMER settings and
the HOUR ON or HOUR OFF indication will stop blinking.
If the “HOUR” message flashes but does not follow any setting, it will stop flashing after 5
seconds. If the TIMER ON or OFF function is activated, press the TIMER button to cancel the
setting.
11. X-Fan button
Press the X-Fan button in COOL or DRY mode to turn on X-fan function and activate the quick
drying function of the indoor unit before the unit is switched off: by pressing this button, the indoor
unit fan continues to vent for some time after the remote control is switched off.
This mode can’t be activated when the unit is running in mode AUTO, FAN or HEAT.
nessuna
visualizzazione
Содержание Ecolight 12000 UI
Страница 28: ...V 11 17 59 ...
