Argo-Hytos SD1EX-A2, Руководство по эксплуатации

Страница: 21 / 42

Subject to change_SD1EX-A2(A3)_14088_1en_05/2022
Page 21
www.argo-hytos.com
Overview and designation of coils, order numbers
Coils with DC power supply, cable grommet, without cable
Designation on the coil
P
N
[W] U
N
[V DC] Designation ARGO-HYTOS Order number
EX18 046 10W 12V DC 10 12 EX22-46/01200-10W-B 42141000
EX18 046 10W 24V DC 10 24 EX22-46/02400-10W-B 42140900
EX18 046 10W 48V DC 10 48 EX22-46/04800-10W-B 42140600
EX18 046 10W 110V DC 10 110 EX22-46/11000-10W-B 42140100
Coils with 50/60 Hz AC power supply and attached cable (3 / 8 m)
Designation on the coil
P
N
[W] U
N
[V AC] Designation ARGO-HYTOS Order number
EX18 046 10W 110V AC 3M 10 110 EX22-46/11050-10W3M-B 42139600
EX18 046 10W 110V AC 8M 10 110 EX22-46/11050-10W8M-B 42139800
EX18 046 10W 230V AC 3M 10 230 EX22-46/23050-10W3M-B 42140700
EX18 046 10W 230V AC 8M 10 230 EX22-46/23050-10W8M-B 42140800
EX22 - 46 / - 10 - B
01200
02400
04800
11000
11050
23050
Solenoid coil for
explosive atmospheres
internal diameter 22 mm
DC power supply Terminal
+cable grommet
AC power supply 50/60 Hz
Installed cable
Casing
12 V DC
24 V DC
48 V DC
110 V DC
110 V AC
230 V AC
Casing surface protection
520 h in NSS according to ISO 9227
Cable length
without cable
cabel 3 m
cabel 8 m
without designation
3M
8M
Nominal coil input power
10 W
Coils for explosive atmospheres - ARGO-HYTOS ordering code
Valve hydraulic part seal kit
4 5
6
3 2 1 4
5 6
7
2 1 5 3 4
Valve type SD1EX-A2
Position Set order number 20776700
1 O-ring 17x1.8 NBR
pcs
1
2 Dualseal 10.3x12.7x3.1 PU 1
Valve type SD1EX-A3
Position Set order number 15661700
1 O-ring 17x1.8 NBR
pcs
1
2 Dualseal 13.47x15.87x3.1 PU 1
3 Dualseal 11.87x14.27x3.1 PU 1
The storage conditions for seals are specified in ISO 2230 - Rubber products - Storage guidelines:
Seals to be stored:
› in covered, dry and tempered areas at temperatures of +15 to +25 °C, away from direct heat sources
› protected from the weather, direct sunlight and ultraviolet radiation
› undeformed, on a clean flat base in the original packaging
› out of reach of petroleum and chemical substances
Rubber group Chemical name abbreviation according to ISO 1629 Chemical composition Length of storage
A Polyuretan AU Polyester urethane rubber 5 years
B NBR Butadiene acrylonitrile rubber 7 years
C FKM / FPM (Viton) Fluoroelastomer 10 years
C VMQ Vinyl-methyl - silicone rubber 10 years
Remove the valve from the hydraulic circuit (see chapter 7.6.1 Emergency and emergency situations). Remove as much residual
working fluid from the valve as possible.Dispose of the valve in an environmentally friendly manner in accordance with the applicable
regulations. The valve is mainly made of recyclable materials such as low carbon steel, copper wire, etc.
(see chapter 4.2 Materials used).
7.9 Product disposal
ARGO-HYTOS s.r.o.
Dělnická 1306 • CZ - 543 01 VRCHLABÍ • Czech Republic
Tel. +420 499 403 111 • E-mail:
info.cz@argo-hytos.com
8. Manufacturer contact