Subject to change · FNA1HV 005_008_016_43622600 · 0421 · EN
Page 21
www.argo-hytos.com
When replacing the pump / motor, proceed with the following steps
:
1. Loosen the hexagon nuts (8) and washers (7).
2. Lift the module “filter pipe and housing“ (2) upwards.
3. Remove the pump plate (5) together with the wheel set (5.1) from the motor (9) and lift them upwards.
4. Detach the motor (9) from the brackets.
5. Dispose of old parts in an environmentally compatible way.
12.1
Disassembly of the pump / motor
Fig. 5: Exploded view of the off-line filter unit
1
2
3
4
5
6
7
8
9
5,1