Subject to change · FNA1HV 005_008_016_43622600 · 0421· EN
Page 24
www.argo-hytos.com
12.3.3 Installation of the filter element
1. When changing the filter element, always replace the O-ring in the cover (part of the delivery).
2. Check the type number of the filter element:
3. (compare the numbers of the laser inscription on the filter element and the type plate).
4. Attach the filter element to the cover (see Fig. 7).
5. Carefully insert the cover with the filter element into the filter housing.
6. Screw the cover in manually until it stops. A gap may remain visible between the cover and the housing (see Fig. 4, page 14).
7. Check that the ventilation slots of the electric motor are clean, remove any contamination.
8. Restart the unit.
9. After commissioning, check the tightness of the filter housing.
Fig. 7: Attaching the cover to the filter element
›
Oil that has accidently drained onto components of the off-line filter unit when changing the filter element,
could be considered as leakage oil.
NOTE
