Subject to change · Filter Unit FAPC 016 · 1020 · EN
Page 18
www.argo-hytos.com
CAUTION
Leaked hydraulic oil
Environmental hazard / risk of slipping
›
Before maintenance and repair work, completely drain the unit.
›
In case of spills, cover the oil-covered surface immediately with an oil-binding medium.
›
Then immediately dispose of the oil-binding medium according to the national environmental regulations.
Ignition hazard
Risk of electrostatic charge by poorly conducting hydraulic fluid
›
If the electrical conductivity of the hydraulic fluid is not known, please contact the manufacturer of the
hydraulic fluid.
Risk of burns
Contact temperatures according to DIN EN563 (3) and DIN EN13202 (4) may be exceeded during
operation.
›
Allow the filter unit to cool down before touching it.
10. Repair and maintenance
DANGER
Danger to life
Risk of electric shock
›
During repair work, turn off the unit and pull the mains plug.
NOTE
Impaired function by dirt ingress into the pump
The function of the filter unit is no longer guaranteed.
›
During repair work, all parts coming in contact with the hydraulic medium, must be kept free of dirt and chips.
10.1 Maintenance
10.2 Maintenance overview
Except from the filter element and the suction strainer, the filter unit is maintenance-free.
Maintenance work
Order No.
Maintenance interval
Checking / changing the filter element
V7.1220-113 (3 µm)
Once the clogging indicator responds with
admissible viscosity
Checking / changing the suction strainer
FA 016.0301
Quarterly or with corresponding
problems (lower volume flow with clean filter
element, too loud noise level)
