Subject to change · Filter Unit FAPC 016 · 1020 · EN
Page 10
www.argo-hytos.com
5. About this product
5.1
Performance description
The filter unit FAPC 016 is a mobile filter system for filtering hydraulic fluids and lubricants with a viscosity of 15 mm
2
/s (min. in
continuous operation) - 150 mm
2
/s in the bypass flow (300 mm
2
/s max. during short-term operation).
A separate installation in the bypass flow or cooling circuit for fine filtration and relief of the main flow filter is also possible, as is the
filtration of fresh oil and the cleaning (flushing) of contaminated systems for the wear protection of components and systems.
The volume flow is 16 l/min.
The operating temperature range is from 0 °C to 60 °C.
5.2
Device description
The filter unit FAPC 016 consists of a support frame in which a filter pump unit is integrated. It consists of an electronically operated
filter pump with a replaceable filter element and a pressure gauge as a maintenance indicator. The on-off switch is located on the
control box of the pump motor. The suction hose is connected at the suction side connection of the pump and the pressure hose is
connected at the main filter outlet.
The particle monitor OPCom can be configured and programmed directly on the device.
Measurement data can be transferred to a PC by means of an RS232 interface and then saved for processing on the PC.
5.3
Component overview
Fig.1: Component overview
Power cord
Protective
strainer
Suction strainer
Circuit breaker
Electric motor
Suction hose
Particle monitor
OPCom
Pressure hose
Valve housing
with valve 1 bar
Three-way
stopcock /
switching lever
Discharge pipe
Drip tray
Filter housing
with filter element
Filter cover
