Page 2
CONTROL FUNCTIONS:
The buttons on the receiver perform the functions as detailed below:
1. CHANNEL UP Button
6. SET Button
2. CHANNEL DOWN Button
7. SCAN Button
3. VOLUME UP Button
8. MEMO Button
4. VOLUME DOWN Button
9. C-SAFE Port
5. MUTE Button
10. Auto Power ON/OFF and
3.5 mm Stereo Audio Jack
MOUNTING INSTRUCTIONS:
The ARG 900MHz receiver is a universal unit designed to be compatible with most makes and models of cardio
equipment. To mount the Receiver:
1. Determine the appropriate location to mount the receiver to the cardio equipment. Take note the
range of motion of the components of machine and make sure the placement of the receiver and its
cabling will not interfere with operation of the machine or any safety features.
2. Slide the cable ties through the appropriate holes in the mounting cleat on the underside of the
receiver. (Top to bottom if you are mounting it to a horizontal bar or side to side if you are mounting
to a vertical bar.)
3. Wrap and thread the cable ties around the bar on the cardio machine at the predetermined
location. Pull the ties tightly around the bar so the receiver does not move or rotate. Be careful not
to over-tighten the ties to avoid cracking the mounting cleat or case of the receiver. Trim off the
excess ends of the cable ties.
4. Connect the power cable to the receiver. The receiver can be powered by either a CSAFE power
outlet on the cardio machine or an A/C power converter that can be plugged into the wall/floor.
(Power adapters and cables are not included and must be ordered separately.) If you are using a
C-SAFE connection: connect one end of the Cat-5 cable to the C-SAFE port on the cardio
machine. (Check with the equipment manufacturer to make sure the machine has this feature and
for location of the outlet.) The other end of the cable connects to the RJ45 receptacle on the back
of the receiver. If you are using an A/C power supply: locate a standard 110V outlet and plug the
12V A/C adapter side into the outlet and the RJ45 plug into the receptacle on the back of the
receiver. Make sure to route the cord for either option appropriately to avoid interference with any
of the functions or safety features of the cardio machine!
