Arfa 1018S, Инструкция по эксплуатации

Страница: 9 / 36

Installation:
As this machine weights 310 kg. It is recommended that the machine shall be
transported, with help of lifting jack.
Transportation Recommendation:
(1). Tighten all locks before operation.
(2). ALWAYS Keep proper footing & balance while moving this 310kgs machine, and
only use heavy duty fiber belt to lift the machine as Fig. A
(3). TURN OFF the power before wiring, & be sure machine in proper grounding,
Overload & circuit breaker is
recommended for safety wiring.
(4). Tighten 4 bolts to base holes after
machine in balance.
(5). CHECK carefully if the saw blade is
running in counter-clock wise direction it
not reverse the wiring per circuit diagram
then repeat the running test.
(6). KEEP machine always out from sun, dust,
wet, raining area.
Fig. A
CLEAIG & LURICATING
(1) Your machine has been coated with a heavy grease to protect it in shipping. This
coating should be completely removed before operating the machine. Commercial
degreaser, kerosene or similar solvent may be used to remove the grease from the
machine, but avoid getting solvent on belts or other rubber parts.
(2) After cleaning, coat all bright work with a light lubricant. Lubricate all points in Fig 1.
With a medium consistency machine oil.
- - 7